This 3D printed bust of Ronald Reagan, the fortieth United States President. This one is printed in a marble PLA, giving it a realistic stone look and a surprise whenever someone picks it up to discover it's actual weight. It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his lifetime on the front, and his dates in office as president on the back.
It stands 7 inches tall, about 3.5 inches wide, 4 inches deep, and weighs about 7 ounces. These aren’t designed to be heavy, if you’re looking for weight please look at my premium line of busts.
If you'd like a 12" version, they can be found at www.facesofhistory.com in the size drop-down menu.
Ronald Wilson Reagan (February 6, 1911 – June 5, 2004) was an American politician who served as the 40th President of the United States from 1981 to 1989. Prior to the presidency, he was a Hollywood actor and union leader before serving as the 33rd Governor of California from 1967 to 1975.
Reagan was raised in a poor family in small towns of northern Illinois. He graduated from Eureka College in 1932 and worked as a sports announcer on several regional radio stations. After moving to California in 1937, he became an actor and starred in a few major productions. Reagan was twice elected President of the Screen Actors Guild—the labor union for actors—where he worked to root out Communist influence. In the 1950s, he moved into television and was a motivational speaker at General Electric factories. Reagan had been a Democrat until 1962, when he became a conservative and switched to the Republican Party. In 1964, Reagan's speech, "A Time for Choosing", supported Barry Goldwater's foundering presidential campaign and earned him national attention as a new conservative spokesman. Building a network of supporters, he was elected Governor of California in 1966. As governor, Reagan raised taxes, turned a state budget deficit to a surplus, challenged the protesters at the University of California, ordered in National Guard troops during a period of protest movements in 1969, and was re-elected in 1970. He twice ran unsuccessfully for the Republican presidential nomination, in 1968 and 1976. Four years later in 1980, he won the nomination, and then defeated incumbent president Jimmy Carter. At 69 years, 349 days of age at the time of his inauguration, he became the oldest president-elect to take the oath of office (a distinction now held by Donald Trump, since 2017). Reagan faced former vice president Walter Mondale when he ran for re-election in 1984, and defeated him in a landslide with the largest electoral college victory in American history.
Read more here: https://en.wikipedia.org/wiki/Ronald_Reagan
Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris
This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machines to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine. Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!
Artwork by Thijs De Vries from deVriesArts.com
Copyright 3DPrintedDebris 2018
Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.
I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:
Holiday Mailing Deadlines
Mailing Within Contiguous US
Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.
Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®
For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.
It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.
INTERNATIONAL BUYERS: Please be aware shipping overseas has been taking up to 90 days to deliver as they clear customs. Items will ship on time, but the time to land is beyond my control. I will not declare an item lost until 90 days has passed from date of shipment.
IMPORT TAXES, DUTIES, and VAT: Buyers are responsible for settling any and all import duties. Normally ETSY collects this on purchase. If in the event Etsy does not, the buyer will need to pay these duties to release the item from their Country's Customs Authority.
REFUSED DELIVERY: Items marked as "Refused" by buyers and returned to me will not be refunded or reshipped.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
All items are sold as-is and are made on-demand, so I don't accept exchanges. Requests for return/refund of an item sold in a color other than what is pictured (i.e. listing is silver, and you order it in purple) will be subject to a 25% restocking fee.
I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.
Please buy insurance on returns. Any damage suffered on a return is the buyer's responsibility. Damaged returns will not receive a refund.
If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it. I buy insurance for items over $50, so if it is damaged I will need the following to make the claim:
1.) Picture of the item
2.) Picture of the packaging
3.) You will need to verify the claim when I send you the link
Note: without the 3 items above I will not send a replacement or issue a refund.
Requests for cancellations made after I have already started working on an item will not be honored.
FREQUENTLY ASKED QUESTIONS
Q: Do you take bust requests?
A: It depends. Determining whether or not a subject is in the open domain is somewhat complicated. Here are the general rules:
1.) I don't do the living (except USA politicians and dignitaries, those are fair game)
2.) Must not be recently deceased (think Ruth Bader Ginsberg, Tom Petty, David Bowie, Steve Jobs, Ansel Adams, etc.). A good
rule of thumb is 70 years, but it varies depending on their state of residence or country or residence.
3.) I don't cover subjects that are "too" controversial (Malcom X, Che Guevara, etc). This is determined on a case-by-case basis
4.) Must at least have a wiki page
5.) No fictional characters created after 1909 (No Darth Vader, Sherlock Holmes, Iron Man, Thor, etc etc)
Q: I'd like a bust of my grandmother, is this something you can do?
A: Yes, but it will be expensive if I need to create the digital asset from scratch. Sculpting costs and prototyping costs will run about $800 for the job, and it will take about 4 weeks. You can reduce this significantly if you obtain a scan of your friend or relative with a smartphone app such as "3DCatch" or any photogrammetry app. Google "photogrammetry apps" for a complete list of free and paid programs.
Q: Can you copy this statue from this photograph?
A: I can, as long as it's old enough that there aren't copyright issues (pre-1909). If you have a file, it will be fairly straightforward and similar to the pricing in my shop for the print. If you only have a picture, and there is no file (STL) in the open domain, sculpting it from scratch will run around $600 and will take a couple of weeks. If it is a work post-1909 I can't help you; I will not copy other artists' copyright-protected original work under any circumstances.
Q: Can you customize the statues or monuments?
A: Unfortunately, not at the price shown. Any change to an existing design will incur a $20 additional fee to account for the changes made and remastering the file for the 3D print.
Q: Do you make custom designs for trailer hitch covers?
A: Not at this time. More often than not the requests are one-offs, and the pricing required to cover all of the hidden costs are often well outside of the required budget. We spread these costs out over selling a model in multiples with the hopes of reaching break-even fairly quickly; some have, others have not.
Q: What are your 3D Prints made of?
A: Every item in my shop is made from Polylactic Acid (PLA), which is a non-toxic organic thermo-polymer made from corn starch or sugarcane and is industrially compostable under very specific and expensive conditions. It will not break down if buried or submerged in water and will last for a very, very long time. 3DPD makes every effort to repurpose and transform waste plastics such as support material and failed prints. One example of this is that our PLA waste is ground up into shards and suspended in the filled and premium bust product lines. Additionally, in-house colors such as black make use of a small percentage of waste plastics to recycle them. Anyone that makes the claim that PLA is “eco-friendly” or “biodegradable” is simply misinformed and has copy/pasted the erroneous marketing materials made available by the manufacturers. 3DPD will aspire to reduce, repurpose, recycle, or upcycle its waste streams and prevent as much material as possible from being sent to the landfill, and a portion of your purchase will be used to fund this ongoing research and development.
Q: Are 3D prints fragile?
A: All of my prints are FDM, meaning they are very rigid and hold up very well to time and use. Occasionally, the USPS will devise a clever way to wreck my work, but this is the exception.
Q: Why are they so light?
A: I combine technology and art to create the strongest possible work, yet the least amount of material consumed and therefore lower cost of manufacture and also shipping cost. It also has the added benefit of allowing multiple works to be placed on floating shelves without the need for elaborate reinforcement or the like. I do also make a premium bust version that are much heavier, but they will need a sturdy shelf if you want to display more than 5 at a time.
Q: Which colors are made in the USA?
A: Black, white marble, bronze, gun metal gray, lime green, green, purple, blue, silver and brown. All of the rest of our colors are sourced globally. Our long term goal is to source USA suppliers for all of our colors, and will continue to add USA sourced filaments.
Q: How close are the colors to what I see in the pictures?
A: Filament manufacture isn't an exact science, and some colors are notoriously difficult to make, let alone consistently. Even the largest manufacturers have some color variation from lot to lot, or even spool to spool. We strive to select only those manufacturers that offer a consistent product. The colors that have the most variation are Gray, White Marble, and Silver. If you buy 10 busts in 2019 and buy 10 more in 2020 there is a good chance they will not be an exact match. For that reason, we recommend against building collections over time unless purchased in White, Black, Gun Metal Gray, or Bronze.
Q: Do 3D prints smell?
A: Absolutely not. PLA is an odorless plastic that doesn't emit any smell. That said, I occasionally use a strawberry-scented accelerator on my glue that makes it cure instantly. For the large busts this is a MUST to get a good bond between the plinths and the bust. If there is any residual accelerator, that strawberry scent will dissipate in a day or so leaving only the odorless print.
Q: I see 10 items listed, does that mean you have 10 to ship tomorrow?
A: If you see "QTY 10" for a given item, it means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will have to slip to reflect the delay in purchase.
Q: Do you sell your STL files?
A: Unfortunately, no. With the significant investment I have made in them I need to maintain control over my digital assets. Once a file is "out there", it's gone for good.
Q: Do you take on 3D print work?
A: If you have a file, I can generate a quote very quickly. It's best if you include a link to a source when you contact me. Please be aware I will not 3D print any of the following under any circumstances:
1) Pornographic content
2) Anything firearms related
3) Fidget Spinners
4) Cookie Cutters
If it is a functional part to be used on a plane, train, boat, or automobile I will require indemnification should the part fail while in use.
Q: If I send you a photo, is it going to be used for marketing purposes?
A: Probably, especially if it is good. If you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.
Q: I don't see an item on your site anymore, can I still buy it?
A: If you're an existing customer that is looking to purchase a replacement or a copy, sure. I've grown a lot personally and professionally since I started this site, and my interests have changed for both legal and personal reasons.
I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.
May 15, 2022
Sep 3, 2021
Always impressed with the details and craftsmenship! I can't wait to buy more for my family! :)
Jun 10, 2021
Great bust of one of the greatest president of all time.
Jul 13, 2020
Excellent items, fine designs et prompt delivery. 5 stars! J.M.