Theodore Roosevelt Teddy USA President #26 7 inch 3D Printed Bust

$25.99



This 3D printed bust of Theodore "Teddy" Roosevelt, the twenty-sixth United States President. This one is printed in a marble PLA, giving it a realistic stone look and a surprise whenever someone picks it up to discover it's actual weight. His glasses are laser printed in SLA resin. It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his lifetime on the front, and his dates in office as president on the back.

It stands 7 inches tall, about 3.5 inches wide, and 4 inches deep. If you'd like different information on the back or front, please put it in your comment when you check out.

From Wikipedia:

Theodore Roosevelt Jr. (October 27, 1858 – January 6, 1919) was an American statesman, sportsman, conservationist and writer who served as the 26th president of the United States from 1901 to 1909. He previously served as the 25th vice president of the United States from March to September 1901 and as the 33rd governor of New York from 1899 to 1900. As a leader of the Republican Party during this time, he became a driving force for the Progressive Era in the United States in the early 20th century. His face is depicted on Mount Rushmore, alongside those of George Washington, Thomas Jefferson, and Abraham Lincoln. In polls of historians and political scientists, Roosevelt is generally ranked as one of the five best presidents.

Roosevelt was born a sickly child with debilitating asthma, but he overcame his physical health problems by embracing a strenuous lifestyle. He integrated his exuberant personality, vast range of interests, and world-famous achievements into a "cowboy" persona defined by robust masculinity. Home-schooled, he began a lifelong naturalist avocation before attending Harvard College. His book, The Naval War of 1812 (1882), established his reputation as both a learned historian and as a popular writer. Upon entering politics, he became the leader of the reform faction of Republicans in New York's state legislature. Following the near-simultaneous deaths of his wife and mother, he escaped to a cattle ranch in the Dakotas. Roosevelt served as Assistant Secretary of the Navy under President William McKinley, but resigned from that post to lead the Rough Riders during the Spanish–American War. Returning a war hero, he was elected Governor of New York in 1898. After the death of Vice President Garret Hobart, the New York state party leadership convinced McKinley to accept Roosevelt as his running mate in the 1900 election. Roosevelt campaigned vigorously, and the McKinley-Roosevelt ticket won a landslide victory based on a platform of peace, prosperity, and conservation.

After taking office as Vice President in March 1901, he became President at age 42 following McKinley's assassination that September, and remains the youngest person to become President of the United States. As a leader of the Progressive movement, he championed his "Square Deal" domestic policies, promising the average citizen fairness, breaking of trusts, regulation of railroads, and pure food and drugs. Making conservation a top priority, he established many new national parks, forests, and monuments intended to preserve the nation's natural resources. In foreign policy, he focused on Central America, where he began construction of the Panama Canal. He expanded the Navy and sent the Great White Fleet on a world tour to project the United States' naval power around the globe. His successful efforts to broker the end of the Russo-Japanese War won him the 1906 Nobel Peace Prize. He avoided controversial tariff and money issues. Elected in 1904 to a full term, Roosevelt continued to promote progressive policies, many of which were passed in Congress. Roosevelt successfully groomed his close friend, William Howard Taft, and Taft won the 1908 presidential election to succeed him.

Read more here: https://en.wikipedia.org/wiki/Theodore_Roosevelt

Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris

This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machines to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine. Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!

Artwork by Thijs De Vries from deVriesArts.com

Copyright 3DPrintedDebris 2018

Payments

Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.

Shipping from United States

I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:

Holiday Mailing Deadlines

Mailing Within Contiguous US

Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.

Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®

For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.

It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.

INTERNATIONAL BUYERS: Please be aware shipping overseas has been taking up to 90 days to deliver as they clear customs. Items will ship on time, but the time to land is beyond my control. I will not declare an item lost until 90 days has passed from date of shipment.

REFUSED DELIVERY: Items marked as "Refused" by buyers and returned to me will not be refunded or reshipped.

Returns & Exchanges

I gladly accept returns

Just contact me within: 14 days of delivery

Ship items back to me within: 30 days of delivery

I don't accept exchanges or cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:

  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are sold as-is and are made on-demand, so I don't accept exchanges. Requests for return/refund of an item sold in a color other than what is pictured (i.e. listing is silver, and you order it in purple) will be subject to a 25% restocking fee.

I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.

Please buy insurance on returns. Any damage suffered on a return is the buyer's responsibility. Damaged returns will not receive a refund.

If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it. I buy insurance for items over $50, so if it is damaged I will need the following to make the claim:
1.) Picture of the item
2.) Picture of the packaging
3.) You will need to verify the claim when I send you the link
Note: without the 3 items above I will not send a replacement or issue a refund.

Requests for cancellations made after I have already started working on an item will not be honored.

Additional

FREQUENTLY ASKED QUESTIONS
Q: Do you take requests?
A: Absolutely! I have a backlog of about 51 subjects I'm chipping away at (I have about 140 subjects so far). If you have a suggestion, please message me and I'll add them to my list. I don't know when they'll pop out on my sites.
Ground rules:
1.) I don't do the living (except USA politicians and dignitaries, those are fair game)
2.) Must not be recently deceased (think Ruth Bader Ginsberg, Tom Petty, David Bowie, etc.)
3.) I don't cover subjects that are "too" controversial (Malcom X, Che Guevara, etc). This is determined on a case-by-case basis
4.) Must at least have a wiki page
5.) No fictional characters created after 1909 (No Vader, Holmes, Iron Man, Thor, etc etc)

Q: I'd like a bust of my grandmother, is this something you can do?
A: Yes, but it will be expensive if I need to create the digital asset from scratch. Sculpting costs and prototyping costs will run about $800 for the job, and it will take about 4 weeks. You can reduce this significantly if you obtain a scan of your friend or relative with a smartphone app such as "3DCatch" or any photogrammetry app. Google "photogrammetry apps" for a complete list of free and paid programs.

Q: Can you copy this statue from this photograph?
A: I can, as long as it's old enough that there aren't copyright issues (pre-1909). If you have a file, it will be fairly straightforward and similar to the pricing in my shop for the print. If you only have a picture, and there is no file (STL) in the open domain, sculpting it from scratch will run around $600 and will take a couple of weeks. If it is a work post-1909 I can't help you; I will not copy other artists' copyright-protected original work under any circumstances.

Q: What are your 3D Prints made of?
A: Every item in my shop is made from Polylactic Acid (PLA), which is a non-toxic organic thermo-polymer made from corn starch or sugarcane and is industrially compostable under very specific and expensive conditions. It will not break down if buried or submerged in water and will last for a very, very long time. 3DPD makes every effort to repurpose and transform waste plastics such as support material and failed prints. One example of this is that our PLA waste is ground up into shards and suspended in the filled and premium bust product lines. Additionally, in-house colors such as black make use of a small percentage of waste plastics to recycle them. Anyone that makes the claim that PLA is “eco-friendly” or “biodegradable” is simply misinformed and has copy/pasted the erroneous marketing materials made available by the manufacturers. 3DPD will aspire to reduce, repurpose, recycle, or upcycle its waste streams and prevent as much material as possible from being sent to the landfill, and a portion of your purchase will be used to fund this ongoing research and development.

Q: Are 3D prints fragile?
A: All of my prints are FDM, meaning they are very rigid and hold up very well to time and use. Occasionally, the USPS will devise a clever way to wreck my work, but this is the exception.

Q: Why are they so light?
A: I combine technology and art to create the strongest possible work, yet the least amount of material consumed and therefore lower cost of manufacture and also shipping cost. It also has the added benefit of allowing multiple works to be placed on floating shelves without the need for elaborate reinforcement or the like. I do also make a premium bust version that are much heavier, but they will need a sturdy shelf if you want to display more than 5 at a time.

Q: Which colors are made in the USA?
A: Black, white marble, bronze, gun metal gray, lime green, green, purple, blue, silver and brown. All of the rest of our colors are sourced globally. Our long term goal is to source USA suppliers for all of our colors, and will continue to add USA sourced filaments.

Q: Do 3D prints smell?
A: Absolutely not. PLA is an odorless plastic that doesn't emit any smell. That said, I occasionally use a strawberry-scented accelerator on my glue that makes it cure instantly. For the large busts this is a MUST to get a good bond between the plinths and the bust. If there is any residual accelerator, that strawberry scent will dissipate in a day or so leaving only the odorless print.

Q: I see 10 items listed, does that mean you have 10 to ship tomorrow?
A: If you see "QTY 10" for a given item, it means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will have to slip to reflect the delay in purchase.

Q: Do you sell your STL files?
A: Unfortunately, no. With the significant investment I have made in them I need to maintain control over my digital assets. Once a file is "out there", it's gone for good.

Q: Do you take on 3D print work?
A: If you have a file, I can generate a quote very quickly. It's best if you include a link to a source when you contact me. Please be aware I will not 3D print any of the following under any circumstances:
1) Pornographic content
2) Anything firearms related
3) Fidget Spinners
4) Cookie Cutters
5) Pokemon
If it is a functional part to be used on a plane, train, boat, or automobile I will require indemnification should the part fail while in use.

Q: If I send you a photo, is it going to be used for marketing purposes?
A: Probably, especially if it is good. If you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.

Q: I don't see an item on your site anymore, can I still buy it?
A: If you're an existing customer that is looking to purchase a replacement or a copy, sure. I've grown a lot personally and professionally since I started this site, and my interests have changed for both legal and personal reasons.

Privacy

I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.

Reviews (1)

Average:

I have purchased several items from 3DPrintedDebris and it is obvious this seller is dedicated to quality. Production, packaging and quick delivery are all great.


Legal imprint