Calvin Coolidge USA President #30 12 inch 2 color 3D Printed Bust

$63.99




This 3D printed bust of Calvin Coolidge, the thirtieth United States President. This one is printed in a bronze and marble PLA, giving it a realistic metal/stone look and a surprise whenever someone picks it up to discover it's actual weight. It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his lifetime on the front, and his dates in office as president on the back.

It stands about 12 inches tall, about 6.25 inches wide, and 5 inches deep. If you'd like different information on the back or front, please put it in your comment when you check out.

From Wikipedia:

On August 2, 1923, President Harding died unexpectedly in San Francisco while on a speaking tour of the western United States. Vice President Coolidge was in Vermont visiting his family home, which had neither electricity nor a telephone, when he received word by messenger of Harding's death. The new president dressed, said a prayer, and came downstairs to greet the reporters who had assembled. His father, a notary public and justice of the peace, administered the oath of office in the family's parlor by the light of a kerosene lamp at 2:47 a.m. on August 3, 1923; President Coolidge then went back to bed.

Coolidge returned to Washington the next day, and was sworn in again by Justice Adolph A. Hoehling Jr. of the Supreme Court of the District of Columbia, to forestall any questions about the authority of a state official to administer a federal oath. This second oath-taking remained a secret until it was revealed by Harry M. Daugherty in 1932, and confirmed by Hoehling. When Hoehling confirmed Daugherty's story, he indicated that Daugherty, then serving as United States Attorney General, asked him to administer the oath without fanfare at the Willard Hotel. According to Hoehling, he did not question Daugherty's reason for requesting a second oath-taking but assumed it was to resolve any doubt about whether the first swearing-in was valid.

President Coolidge signing appropriation bills for the Veterans Bureau on the South Lawn during the garden party for wounded veterans, June 5, 1924. General John J. Pershing is at left. The man at right, looking on, appears to be Veterans Bureau Director Frank T. Hines.
The nation initially did not know what to make of Coolidge, who had maintained a low profile in the Harding administration; many had even expected him to be replaced on the ballot in 1924. Coolidge believed that those of Harding's men under suspicion were entitled to every presumption of innocence, taking a methodical approach to the scandals, principally the Teapot Dome scandal, while others clamored for rapid punishment of those they presumed guilty. Coolidge thought the Senate investigations of the scandals would suffice; this was affirmed by the resulting resignations of those involved. He personally intervened in demanding the resignation of Attorney General Harry M. Daugherty after he refused to cooperate with the congressional probe. He then set about to confirm that no loose ends remained in the administration, arranging for a full briefing on the wrongdoing. Harry A. Slattery reviewed the facts with him, Harlan F. Stone analyzed the legal aspects for him and Senator William E. Borah assessed and presented the political factors.

Coolidge addressed Congress when it reconvened on December 6, 1923, giving a speech that supported many of Harding's policies, including Harding's formal budgeting process, the enforcement of immigration restrictions and arbitration of coal strikes ongoing in Pennsylvania. Coolidge's speech was the first presidential speech to be broadcast over the radio. The Washington Naval Treaty was proclaimed just one month into Coolidge's term, and was generally well received in the country. In May 1924, the World War I veterans' World War Adjusted Compensation Act or "Bonus Bill" was passed over his veto. Coolidge signed the Immigration Act later that year, which was aimed at restricting southern and eastern European immigration, but appended a signing statement expressing his unhappiness with the bill's specific exclusion of Japanese immigrants. Just before the Republican Convention began, Coolidge signed into law the Revenue Act of 1924, which reduced the top marginal tax rate from 58% to 46%, as well as personal income tax rates across the board, increased the estate tax and bolstered it with a new gift tax.

Read more here: https://en.wikipedia.org/wiki/Calvin_Coolidge

Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris

This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machine to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine.

Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. All items are printed in PLA, an organic non-toxic plastic made from corn and is biodegradable, yet very strong. PLA will not degrade under normal use, but will break down when buried.

If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!

Artwork by Thijs De Vries from www.deVriesArts.com

Copyright 3DPrintedDebris 2018

Payments

Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.

Shipping from United States

I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:

Holiday Mailing Deadlines

Mailing Within Contiguous US

Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.

Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®

For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.

It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.

INTERNATIONAL BUYERS: I have suspended international shipping (except Canada) on my Etsy store until further notice due to COVID-19. Items are taking too long, if they land at all.

Returns & Exchanges

I gladly accept returns

Just contact me within: 14 days of delivery

Ship items back to me within: 30 days of delivery

I don't accept exchanges or cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:

  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are sold as-is and are made on-demand, so I don't accept exchanges. Requests for return/refund of an item sold in a color other than what is pictured (i.e. listing is silver, and you order it in purple) will be subject to a 25% restocking fee.

I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.

Please buy insurance on returns. Any damage suffered on a return is the buyer's responsibility. Damaged returns will not receive a refund.

If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it. I buy insurance for items over $50, so if it is damaged I will need the following to make the claim:
1.) Picture of the item
2.) Picture of the packaging
3.) You will need to verify the claim when I send you the link
Note: without the 3 items above I will not send a replacement or issue a refund.

Requests for cancellations made after I have already started working on an item will not be honored.

Additional

FREQUENTLY ASKED QUESTIONS
Q: Do you take requests?
A: Unfortunately, I can't at this time. Each bust you see was artfully sculpted in 3D at a significant expense and commitment of time. I wish it were as easy as "scanning a photo to 3D", but the technology just can't compare to a highly skilled artist. I'm always open to suggestions and on the lookout for new subjects, so feel free to reach out with a suggestion. If I get enough interest, I'll commit to producing it.

Q: I'd like a bust of my grandmother, is this something you can do?
A: Yes, but it will be expensive if I need to create the digital asset from scratch. Sculpting costs and prototyping costs will run about $800 for the job, and it will take about 4 weeks. You can reduce this significantly if you obtain a scan of your friend or relative with a smartphone app such as "3DCatch" or any photogrammetry app. Google "photogrammetry apps" for a complete list of free and paid programs.

Q: Can you copy this statue from this photograph?
A: I can, as long as it's old enough that there aren't copyright issues. If you have a file, it will be fairly straightforward and similar to the pricing in my shop for the print. If you only have a picture, and there is no file (STL) in the open domain, sculpting it from scratch will run around $600 and will take a couple of weeks.

Q: Are 3D prints fragile?
A: All of my prints are FDM, meaning they are very rigid and hold up very well to time and use. Occasionally, the USPS will devise a clever way to wreck my work, but this is the exception.

Q: Why are they so light?
A: I combine technology and art to create the strongest possible work, yet the least amount of material consumed and therefore lower cost of manufacture and also shipping cost. It also has the added benefit of allowing multiple works to be placed on floating shelves without the need for elaborate reinforcement or the like. I do also make a premium bust version that are much heavier, but they will need a sturdy shelf if you want to display more than 5 at a time.

Q: Do 3D prints smell?
A: Absolutely not. PLA is an odorless plastic that doesn't emit any smell. That said, I occasionally use a strawberry-scented accelerator on my glue that makes it cure instantly. For the large busts this is a MUST to get a good bond between the plinths and the bust. If there is any residual accelerator, that strawberry scent will dissipate in a day or so leaving only the odorless print.

Q: I see 10 items listed, does that mean you have 10 to ship tomorrow?
A: If you see "QTY 10" for a given item, it means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will have to slip to reflect the delay in purchase.

Q: Do you sell your STL files?
A: Unfortunately, no. With the significant investment I have made in them I need to maintain control over my digital assets. Once a file is "out there", it's gone for good.

Q: Do you take on 3D print work?
A: If you have a file, I can generate a quote very quickly. It's best if you include a link to a source when you contact me. Please be aware I will not 3D print any of the following under any circumstances:
1) Pornographic content
2) Anything firearms related
3) Fidget Spinners
4) Cookie Cutters
5) Pokemon
If it is a functional part to be used on a plane, train, boat, or automobile I will require indemnification should the part fail while in use.

Q: If I send you a photo, is it going to be used for marketing purposes?
A: Probably, especially if it is good. If you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.

Privacy

I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.

Legal imprint