Chester A. Aurthur USA President #21 7 inch 3D Printed Bust

$25.99



This 3D printed bust of Chester A. Arthur, the twenty-first United States President. This one is printed in a marble PLA, giving it a realistic stone look and a surprise whenever someone picks it up to discover it's actual weight. It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his lifetime on the front, and his dates in office as president on the back.

It stands 7 inches tall, about 3.5 inches wide, and 4 inches deep. If you'd like different information on the back or front, please put it in your comment when you check out.

From Wikipedia:

Chester Alan Arthur (October 5, 1829 – November 18, 1886) was an American attorney and politician who served as the 21st president of the United States from 1881 to 1885. He previously was the 20th vice president of the United States, and he succeeded to the presidency upon the death of President James A. Garfield in September 1881, two months after Garfield was shot by an assassin.

Arthur was born in Fairfield, Vermont, grew up in upstate New York, and practiced law in New York City. He served as quartermaster general of the New York Militia during the American Civil War. Following the war, he devoted more time to Republican politics and quickly rose in New York Senator Roscoe Conkling's political machine. Appointed by President Ulysses S. Grant to the lucrative and politically powerful post of Collector of the Port of New York in 1871, Arthur was an important supporter of Conkling and the Stalwart faction of the Republican Party. In 1878, the new president, Rutherford B. Hayes, fired Arthur as part of a plan to reform the federal patronage system in New York. When Garfield won the Republican nomination for president in 1880, Arthur, an eastern Stalwart, was nominated for vice president to balance the ticket. Four months into his term, Garfield was shot by an assassin; he died 11 weeks later, and Arthur assumed the presidency.

At the outset, Arthur struggled to overcome a negative reputation as a Stalwart and product of Conkling's machine. To the surprise of reformers, he took up the cause of civil service reform. Arthur advocated and enforced the Pendleton Civil Service Reform Act. He presided over the rebirth of the United States Navy, but was criticized for failing to alleviate the federal budget surplus, which had been accumulating since the end of the Civil War. Arthur signed the Chinese Exclusion Act, which resulted in denying citizenship to Chinese Americans until 1898 and barring Chinese immigration until 1943. Building on the 1875 Page Act, which barred Chinese women from entering the country, it was the first total ban on a nation or ethnic group from immigrating to the country.

Suffering from poor health, Arthur made only a limited effort to secure the Republican Party's nomination in 1884; he retired at the close of his term. Journalist Alexander McClure later wrote, "No man ever entered the Presidency so profoundly and widely distrusted as Chester Alan Arthur, and no one ever retired ... more generally respected, alike by political friend and foe."[2] Although his failing health and political temperament combined to make his administration less active than a modern presidency, he earned praise among contemporaries for his solid performance in office. The New York World summed up Arthur's presidency at his death in 1886: "No duty was neglected in his administration, and no adventurous project alarmed the nation."[3] Mark Twain wrote of him, "[I]t would be hard indeed to better President Arthur's administration."[4] Over the 20th and 21st centuries, however, Arthur's reputation mostly faded among the public.

Read more here: https://en.wikipedia.org/wiki/Chester_A._Arthur


Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris

This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machine to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine.

Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. All items are printed in PLA, an organic non-toxic plastic made from corn and is biodegradable, yet very strong. PLA will not degrade under normal use, but will break down when buried.

If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!

Artwork by Thijs De Vries from deVriesArts.com

Copyright 3DPrintedDebris 2018

Payments

Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.

Shipping from United States

I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:

Holiday Mailing Deadlines

Mailing Within Contiguous US

Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.

Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®

For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.

It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.

Etsy shows the text "VAT included (where applicable)" under the price of all items that ship to the EU. That is a general blanket statement which only applies to EU sellers who are VAT registered. I live in the USA, I am not VAT registered, no VAT is included in the price for any of my listings. VAT/customs/duty charged by your country are the "BUYERS RESPONSIBILITY*. You will have to pay VAT and additional charges upon receipt of your purchase. Items returned for non-payment of VAT or customs will not be refunded shipping and will be subject to a 25% restocking fee.

Returns & Exchanges

I gladly accept returns

Just contact me within: 14 days of delivery

Ship items back to me within: 30 days of delivery

I don't accept exchanges or cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:

  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are sold as-is and are made on-demand, so I don't exchanges.

I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.

If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it.

Requests for cancellations made after I have already started working on an item will not be honored.

Additional

A quick note on turn-around times - If you see "QTY 10" for a given item, that doesn't mean I have 10 made and they will ship instantly. It means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will slip to reflect the delay in purchase.

Photo copyright release: if you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.

Barrel Plugs: Any prop or replica that could be confused with a real firearm will come with a Blaze Orange plug permanently affixed per federal regulation for marking such items.

Privacy

I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.

Legal imprint