Warren G. Harding USA President #29 7 inch 3D Printed Bust

$25.99



This 3D printed bust of Warren G. Harding, the twenty-ninth United States President. This one is printed in a marble PLA, giving it a realistic stone look and a surprise whenever someone picks it up to discover it's actual weight. It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his lifetime on the front, and his dates in office as president on the back.

It stands 7 inches tall, about 3.5 inches wide, and 4 inches deep. If you'd like different information on the back or front, please put it in your comment when you check out.

From Wikipedia:

Warren Gamaliel Harding (November 2, 1865 – August 2, 1923) was the 29th president of the United States from 1921 until his death in 1923. A member of the Republican Party, he was one of the most popular U.S. presidents to that point. After his death, a number of scandals—including Teapot Dome—came to light, as did his extramarital affair with Nan Britton; each eroded his popular regard. Harding is often rated as one of the worst presidents in historical rankings.

Harding lived in rural Ohio all his life, except when political service took him elsewhere. As a young man, he bought The Marion Star and built it into a successful newspaper. In 1899, he was elected to the Ohio State Senate; he spent four years there, then was elected lieutenant governor. He was defeated for governor in 1910, but was elected to the U.S. Senate in 1914. He ran for the Republican nomination for president in 1920, and he was considered a long shot until after the convention began. The leading candidates could not gain the needed majority, and the convention deadlocked. Harding's support gradually grew until he was nominated on the tenth ballot. He conducted a front porch campaign, remaining for the most part in Marion and allowing the people to come to him, and running on a theme of a return to normalcy of the pre-World War I period. He won in a landslide over Democrat James M. Cox and the then-imprisoned Socialist Party candidate Eugene Debs and became the first sitting senator to be elected president.

Harding appointed a number of well-regarded figures to his cabinet, including Andrew Mellon at Treasury, Herbert Hoover at the Department of Commerce, and Charles Evans Hughes at the State Department. A major foreign policy achievement came with the Washington Naval Conference of 1921–1922, in which the world's major naval powers agreed on a naval limitations program that lasted a decade. Harding released political prisoners who had been arrested for their opposition to World War I. His cabinet members Albert B. Fall (Interior Secretary) and Harry Daugherty (Attorney General) were each later tried for corruption in office; these and other scandals greatly damaged Harding's posthumous reputation. Harding died of a heart attack in San Francisco while on a western tour and was succeeded by Vice President Calvin Coolidge.

Read more here: https://en.wikipedia.org/wiki/Warren_G._Harding

Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris

This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machines to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine. Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!

Artwork by Thijs De Vries from deVriesArts.com

Copyright 3DPrintedDebris 2018

Payments

Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.

Shipping from United States

I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:

Holiday Mailing Deadlines

Mailing Within Contiguous US

Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.

Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®

For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.

It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.

INTERNATIONAL BUYERS: Please be aware shipping overseas has been taking up to 90 days to deliver as they clear customs. Items will ship on time, but the time to land is beyond my control. I will not declare an item lost until 90 days has passed from date of shipment.

REFUSED DELIVERY: Items marked as "Refused" by buyers and returned to me will not be refunded or reshipped.

Returns & Exchanges

I gladly accept returns

Just contact me within: 14 days of delivery

Ship items back to me within: 30 days of delivery

I don't accept exchanges or cancellations

But please contact me if you have any problems with your order.

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:

  • Custom or personalized orders
  • Perishable products (like food or flowers)
  • Digital downloads
  • Intimate items (for health/hygiene reasons)

Returns and exchange details

All items are sold as-is and are made on-demand, so I don't accept exchanges. Requests for return/refund of an item sold in a color other than what is pictured (i.e. listing is silver, and you order it in purple) will be subject to a 25% restocking fee.

I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.

Please buy insurance on returns. Any damage suffered on a return is the buyer's responsibility. Damaged returns will not receive a refund.

If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it. I buy insurance for items over $50, so if it is damaged I will need the following to make the claim:
1.) Picture of the item
2.) Picture of the packaging
3.) You will need to verify the claim when I send you the link
Note: without the 3 items above I will not send a replacement or issue a refund.

Requests for cancellations made after I have already started working on an item will not be honored.

Additional

FREQUENTLY ASKED QUESTIONS
Q: Do you take requests?
A: Absolutely! I have a backlog of about 51 subjects I'm chipping away at (I have about 140 subjects so far). If you have a suggestion, please message me and I'll add them to my list. I don't know when they'll pop out on my sites.
Ground rules:
1.) I don't do the living (except USA politicians and dignitaries, those are fair game)
2.) Must not be recently deceased (think Ruth Bader Ginsberg, Tom Petty, David Bowie, etc.)
3.) I don't cover subjects that are "too" controversial (Malcom X, Che Guevara, etc). This is determined on a case-by-case basis
4.) Must at least have a wiki page
5.) No fictional characters created after 1909 (No Vader, Holmes, Iron Man, Thor, etc etc)

Q: I'd like a bust of my grandmother, is this something you can do?
A: Yes, but it will be expensive if I need to create the digital asset from scratch. Sculpting costs and prototyping costs will run about $800 for the job, and it will take about 4 weeks. You can reduce this significantly if you obtain a scan of your friend or relative with a smartphone app such as "3DCatch" or any photogrammetry app. Google "photogrammetry apps" for a complete list of free and paid programs.

Q: Can you copy this statue from this photograph?
A: I can, as long as it's old enough that there aren't copyright issues (pre-1909). If you have a file, it will be fairly straightforward and similar to the pricing in my shop for the print. If you only have a picture, and there is no file (STL) in the open domain, sculpting it from scratch will run around $600 and will take a couple of weeks. If it is a work post-1909 I can't help you; I will not copy other artists' copyright-protected original work under any circumstances.

Q: What are your 3D Prints made of?
A: Every item in my shop is made from Polylactic Acid (PLA), which is a non-toxic organic thermo-polymer made from corn starch or sugarcane and is industrially compostable under very specific and expensive conditions. It will not break down if buried or submerged in water and will last for a very, very long time. 3DPD makes every effort to repurpose and transform waste plastics such as support material and failed prints. One example of this is that our PLA waste is ground up into shards and suspended in the filled and premium bust product lines. Additionally, in-house colors such as black make use of a small percentage of waste plastics to recycle them. Anyone that makes the claim that PLA is “eco-friendly” or “biodegradable” is simply misinformed and has copy/pasted the erroneous marketing materials made available by the manufacturers. 3DPD will aspire to reduce, repurpose, recycle, or upcycle its waste streams and prevent as much material as possible from being sent to the landfill, and a portion of your purchase will be used to fund this ongoing research and development.

Q: Are 3D prints fragile?
A: All of my prints are FDM, meaning they are very rigid and hold up very well to time and use. Occasionally, the USPS will devise a clever way to wreck my work, but this is the exception.

Q: Why are they so light?
A: I combine technology and art to create the strongest possible work, yet the least amount of material consumed and therefore lower cost of manufacture and also shipping cost. It also has the added benefit of allowing multiple works to be placed on floating shelves without the need for elaborate reinforcement or the like. I do also make a premium bust version that are much heavier, but they will need a sturdy shelf if you want to display more than 5 at a time.

Q: Which colors are made in the USA?
A: Black, white marble, bronze, gun metal gray, lime green, green, purple, blue, silver and brown. All of the rest of our colors are sourced globally. Our long term goal is to source USA suppliers for all of our colors, and will continue to add USA sourced filaments.

Q: Do 3D prints smell?
A: Absolutely not. PLA is an odorless plastic that doesn't emit any smell. That said, I occasionally use a strawberry-scented accelerator on my glue that makes it cure instantly. For the large busts this is a MUST to get a good bond between the plinths and the bust. If there is any residual accelerator, that strawberry scent will dissipate in a day or so leaving only the odorless print.

Q: I see 10 items listed, does that mean you have 10 to ship tomorrow?
A: If you see "QTY 10" for a given item, it means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will have to slip to reflect the delay in purchase.

Q: Do you sell your STL files?
A: Unfortunately, no. With the significant investment I have made in them I need to maintain control over my digital assets. Once a file is "out there", it's gone for good.

Q: Do you take on 3D print work?
A: If you have a file, I can generate a quote very quickly. It's best if you include a link to a source when you contact me. Please be aware I will not 3D print any of the following under any circumstances:
1) Pornographic content
2) Anything firearms related
3) Fidget Spinners
4) Cookie Cutters
5) Pokemon
If it is a functional part to be used on a plane, train, boat, or automobile I will require indemnification should the part fail while in use.

Q: If I send you a photo, is it going to be used for marketing purposes?
A: Probably, especially if it is good. If you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.

Q: I don't see an item on your site anymore, can I still buy it?
A: If you're an existing customer that is looking to purchase a replacement or a copy, sure. I've grown a lot personally and professionally since I started this site, and my interests have changed for both legal and personal reasons.

Privacy

I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.

Legal imprint