This is a 3D printed bust of Alan Turing, famous English mathematician, computer scientist, logician, cryptanalyst, philosopher, and theoretical biologist. This one is printed in gray PLA, and It is more durable than alabaster or plaster, and is washable with lukewarm soapy water for easy spring cleaning. It comes on a custom plinth that has his name on the front.
Small: It stands 5 inches tall, about 3 inches wide, and 2 inches deep. It weighs about 3 ounces.
If you'd like a 12" version, they can be found at www.facesofhistory.com in the size drop-down menu.
Large: It stands 12 inches tall, about 6 inches wide, and 6 inches deep. It weighs about 14 ounces.
Large Solid: It stands 12 inches tall, about 6 inches wide, and 6 inches deep. This will come filled with a mixture of sand and plaster and it weighs about 7 POUNDS. Unfortunately, these can’t be shipped internationally without an additional $50 shipping fee paid by paypal.
Developed by MIT, these busts feature a space-aged infill pattern that mimics sea sponges. This creates a lightweight, yet ridiculously strong part. In addition to be strong, the interior is completely porous; If you were to drill a fill port into the bottom you could easily fill the model with plaster, sand, or resin to give it more weight if that's what you're into.
Alan Mathison Turing (June 1912 – 7 June 1954) was an English mathematician, computer scientist, logician, cryptanalyst, philosopher, and theoretical biologist. Turing was highly influential in the development of theoretical computer science, providing a formalisation of the concepts of algorithm and computation with the Turing machine, which can be considered a model of a general-purpose computer. Turing is widely considered to be the father of theoretical computer science and artificial intelligence. Despite these accomplishments, he was not fully recognised in his home country during his lifetime, due to his homosexuality, and because much of his work was covered by the Official Secrets Act.
During the Second World War, Turing worked for the Government Code and Cypher School (GC&CS) at Bletchley Park, Britain's codebreaking centre that produced Ultra intelligence. For a time he led Hut 8, the section that was responsible for German naval cryptanalysis. Here, he devised a number of techniques for speeding the breaking of German ciphers, including improvements to the pre-war Polish bombe method, an electromechanical machine that could find settings for the Enigma machine.
Turing played a crucial role in cracking intercepted coded messages that enabled the Allies to defeat the Nazis in many crucial engagements, including the Battle of the Atlantic, and in so doing helped win the war. Due to the problems of counterfactual history, it is hard to estimate the precise effect Ultra intelligence had on the war, but at the upper end it has been estimated that this work shortened the war in Europe by more than two years and saved over 14 million lives.
After the war, Turing worked at the National Physical Laboratory, where he designed the Automatic Computing Engine, which was one of the first designs for a stored-program computer. In 1948, Turing joined Max Newman's Computing Machine Laboratory at the Victoria University of Manchester, where he helped develop the Manchester computers and became interested in mathematical biology. He wrote a paper on the chemical basis of morphogenesis and predicted oscillating chemical reactions such as the Belousov–Zhabotinsky reaction, first observed in the 1960s.
Turing was prosecuted in 1952 for homosexual acts; the Labouchere Amendment of 1885 had mandated that "gross indecency" was a criminal offence in the UK. He accepted chemical castration treatment, with DES, as an alternative to prison. Turing died in 1954, 16 days before his 42nd birthday, from cyanide poisoning. An inquest determined his death as a suicide, but it has been noted that the known evidence is also consistent with accidental poisoning.
In 2009, following an Internet campaign, British Prime Minister Gordon Brown made an official public apology on behalf of the British government for "the appalling way he was treated". Queen Elizabeth II granted Turing a posthumous pardon in 2013. The Alan Turing law is now an informal term for a 2017 law in the United Kingdom that retroactively pardoned men cautioned or convicted under historical legislation that outlawed homosexual acts.
Read more here: https://en.wikipedia.org/wiki/Alan_Turing
Not your thing? Well, check out my other designs here: https://www.etsy.com/shop/3DPrintedDebris
This is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). I have spent months building my own machines to exact specifications for accuracy and surface quality, and I scrutinize every model very closely. I use only the highest quality filament to ensure colors are vibrant and defects are kept to an absolute minimum for both your item and my machine. Every item in my shop is test printed and checked for not only aesthetics, but also the intended use. All of my items I list I personally test to ensure they meet my stringent standards. If I'm not happy with it, it doesn’t ship. You will get my very best work, which you will find is a cut above the rest!
Copyright 3DPD 2020
Payment prior to starting work or initiating delivery. I can accept Etsy payments or paypal.
I will ship as soon as your item is ready, in most cases within a couple days. If I'm backed up, I will let you know sooner rather than later. As soon as I ship, I'll provide you a tracking number. For the holidays, here's the deadlines from the USPS:
Holiday Mailing Deadlines
Mailing Within Contiguous US
Make sure your mail and packages arrive in time for the holidays by mailing before these recommended deadlines, excluding Alaska and Hawaii.
Send-by dates for expected delivery before Dec. 25th (Actual delivery date may vary and is based on origin, destination, Post Office acceptance time, and other conditions).
December 14 — USPS Retail Ground®
December 19 — First-Class Mail®
December 20 — Priority Mail®
December 22 — Priority Mail Express®
For Priority Mail Express® shipments mailed December 23 through December 25, the money-back guarantee applies only if the shipment was not delivered, or delivery was not attempted, within two (2) business days.
It will take me at least the minimum number of days (i.e. if the item says 5-7 days, 5 is the minimum it will take me to make it and ship it) to make the item and get it in the mail, so please add that to the USPS deadlines to ensure delivery before Christmas.
INTERNATIONAL BUYERS: Please be aware shipping overseas has been taking up to 90 days to deliver as they clear customs. Items will ship on time, but the time to land is beyond my control. I will not declare an item lost until 90 days has passed from date of shipment.
IMPORT TAXES, DUTIES, and VAT: Buyers are responsible for settling any and all import duties. Normally ETSY collects this on purchase. If in the event Etsy does not, the buyer will need to pay these duties to release the item from their Country's Customs Authority.
REFUSED DELIVERY: Items marked as "Refused" by buyers and returned to me will not be refunded or reshipped.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
All items are sold as-is and are made on-demand, so I don't accept exchanges. Requests for return/refund of an item sold in a color other than what is pictured (i.e. listing is silver, and you order it in purple) will be subject to a 25% restocking fee.
I accept returns within 30 days of delivery, all that I ask is that you pay the return postage.
Please buy insurance on returns. Any damage suffered on a return is the buyer's responsibility. Damaged returns will not receive a refund.
If an item is damaged in shipping, please take a picture and contact me via conversation. If it can be repaired I'll ask you to ship it back to me and I'll fix it. I buy insurance for items over $50, so if it is damaged I will need the following to make the claim:
1.) Picture of the item
2.) Picture of the packaging
3.) You will need to verify the claim when I send you the link
Note: without the 3 items above I will not send a replacement or issue a refund.
Requests for cancellations made after I have already started working on an item will not be honored.
FREQUENTLY ASKED QUESTIONS
Q: Do you take bust requests?
A: It depends. Determining whether or not a subject is in the open domain is somewhat complicated. Here are the general rules:
1.) I don't do the living (except USA politicians and dignitaries, those are fair game)
2.) Must not be recently deceased (think Ruth Bader Ginsberg, Tom Petty, David Bowie, Steve Jobs, Ansel Adams, etc.). A good
rule of thumb is 70 years, but it varies depending on their state of residence or country or residence.
3.) I don't cover subjects that are "too" controversial (Malcom X, Che Guevara, etc). This is determined on a case-by-case basis
4.) Must at least have a wiki page
5.) No fictional characters created after 1909 (No Darth Vader, Sherlock Holmes, Iron Man, Thor, etc etc)
Q: I'd like a bust of my grandmother, is this something you can do?
A: Yes, but it will be expensive if I need to create the digital asset from scratch. Sculpting costs and prototyping costs will run about $800 for the job, and it will take about 4 weeks. You can reduce this significantly if you obtain a scan of your friend or relative with a smartphone app such as "3DCatch" or any photogrammetry app. Google "photogrammetry apps" for a complete list of free and paid programs.
Q: Can you copy this statue from this photograph?
A: I can, as long as it's old enough that there aren't copyright issues (pre-1909). If you have a file, it will be fairly straightforward and similar to the pricing in my shop for the print. If you only have a picture, and there is no file (STL) in the open domain, sculpting it from scratch will run around $600 and will take a couple of weeks. If it is a work post-1909 I can't help you; I will not copy other artists' copyright-protected original work under any circumstances.
Q: Can you customize the statues or monuments?
A: Unfortunately, not at the price shown. Any change to an existing design will incur a $20 additional fee to account for the changes made and remastering the file for the 3D print.
Q: Do you make custom designs for trailer hitch covers?
A: Not at this time. More often than not the requests are one-offs, and the pricing required to cover all of the hidden costs are often well outside of the required budget. We spread these costs out over selling a model in multiples with the hopes of reaching break-even fairly quickly; some have, others have not.
Q: What are your 3D Prints made of?
A: Every item in my shop is made from Polylactic Acid (PLA), which is a non-toxic organic thermo-polymer made from corn starch or sugarcane and is industrially compostable under very specific and expensive conditions. It will not break down if buried or submerged in water and will last for a very, very long time. 3DPD makes every effort to repurpose and transform waste plastics such as support material and failed prints. One example of this is that our PLA waste is ground up into shards and suspended in the filled and premium bust product lines. Additionally, in-house colors such as black make use of a small percentage of waste plastics to recycle them. Anyone that makes the claim that PLA is “eco-friendly” or “biodegradable” is simply misinformed and has copy/pasted the erroneous marketing materials made available by the manufacturers. 3DPD will aspire to reduce, repurpose, recycle, or upcycle its waste streams and prevent as much material as possible from being sent to the landfill, and a portion of your purchase will be used to fund this ongoing research and development.
Q: Are 3D prints fragile?
A: All of my prints are FDM, meaning they are very rigid and hold up very well to time and use. Occasionally, the USPS will devise a clever way to wreck my work, but this is the exception.
Q: Why are they so light?
A: I combine technology and art to create the strongest possible work, yet the least amount of material consumed and therefore lower cost of manufacture and also shipping cost. It also has the added benefit of allowing multiple works to be placed on floating shelves without the need for elaborate reinforcement or the like. I do also make a premium bust version that are much heavier, but they will need a sturdy shelf if you want to display more than 5 at a time.
Q: Which colors are made in the USA?
A: Black, white marble, bronze, gun metal gray, lime green, green, purple, blue, silver and brown. All of the rest of our colors are sourced globally. Our long term goal is to source USA suppliers for all of our colors, and will continue to add USA sourced filaments.
Q: How close are the colors to what I see in the pictures?
A: Filament manufacture isn't an exact science, and some colors are notoriously difficult to make, let alone consistently. Even the largest manufacturers have some color variation from lot to lot, or even spool to spool. We strive to select only those manufacturers that offer a consistent product. The colors that have the most variation are Gray, White Marble, and Silver. If you buy 10 busts in 2019 and buy 10 more in 2020 there is a good chance they will not be an exact match. For that reason, we recommend against building collections over time unless purchased in White, Black, Gun Metal Gray, or Bronze.
Q: Do 3D prints smell?
A: Absolutely not. PLA is an odorless plastic that doesn't emit any smell. That said, I occasionally use a strawberry-scented accelerator on my glue that makes it cure instantly. For the large busts this is a MUST to get a good bond between the plinths and the bust. If there is any residual accelerator, that strawberry scent will dissipate in a day or so leaving only the odorless print.
Q: I see 10 items listed, does that mean you have 10 to ship tomorrow?
A: If you see "QTY 10" for a given item, it means I can make 10 of them inside of the advertised delivery date listed. If you ask me for an estimated shipping date and wait 5 days to actually buy the item, the ship date will have to slip to reflect the delay in purchase.
Q: Do you sell your STL files?
A: Unfortunately, no. With the significant investment I have made in them I need to maintain control over my digital assets. Once a file is "out there", it's gone for good.
Q: Do you take on 3D print work?
A: If you have a file, I can generate a quote very quickly. It's best if you include a link to a source when you contact me. Please be aware I will not 3D print any of the following under any circumstances:
1) Pornographic content
2) Anything firearms related
3) Fidget Spinners
4) Cookie Cutters
If it is a functional part to be used on a plane, train, boat, or automobile I will require indemnification should the part fail while in use.
Q: If I send you a photo, is it going to be used for marketing purposes?
A: Probably, especially if it is good. If you upload or email a photo to my site or to my inbox you are giving me permission to use it in social media or for marketing purposes. I will not cite the source of the photo, and I might create a derivative (filters, cropping, etc) of your photo.
Q: I don't see an item on your site anymore, can I still buy it?
A: If you're an existing customer that is looking to purchase a replacement or a copy, sure. I've grown a lot personally and professionally since I started this site, and my interests have changed for both legal and personal reasons.
I do not collect personal information other than what's legally required for tax purposes. I do not sell customer information under any circumstances. From time to time I may release a new item that is a companion to something you've already purchased from me, and in that case, I may send you an email letting you know it's newly listed on my site.
Dec 28, 2021
Nov 11, 2021
Excellent. Highly recommendable. Quick, very good product.
Nov 5, 2021
Aug 22, 2021
As expected, and well received! It graces the CS student common room - and is a most welcome addition!
Jan 20, 2021
I am pleased with the 5" Alan Turing bust that arrived today. It looks good, has a nice finish, and international shipment went speedily enough.